Maskless OLED production - Page 2

In 2022, Japan Display (JDI) announced that it has developed a "historic breakthrough in display technology" - a new OLED deposition process which they refer to as eLEAP, that is said to be cost effective and can be used to create freeform OLEDs that are brighter, more efficient, and longer lasting compared to OLEDs produced using mask evaporation (FMM).

Japan Display announced an agreement with China-based LCD maker HKC Corp to mass produce panels by 2025 in China, based on JDI's technology, but the plan was later cancelled, and JDI said it will establish its own factory in China. The company now says that it is progressing with its negotiations with the Wuhu Economic and Technological Development Zone (in Anhui Province), and the hope is to reach a final agreement will be reached by the end of the year. Interestingly, JDI also says that it is considering building an eLEAP AMOLED fab in India, but we do not have more details.

A report from Korea's The Elec publication says that Samsung Display is highly interested in next-generation OLED deposition technologies, that are not based on a metal mask (FMM). Several companies are developing and commercialization such technologies. As these may enable higher-performance OLED production, Samsung Display is interested.

A few months ago we reported that SDC is interested in SEL's maskless production technology, and indeed the new The Elec report states that the two companies are in talks. SEL is one of the three companies we are aware of that have advanced maskless technologies, the other two being Visionox and Japan Display. Samsung Display is mostly interested in a technology that it can exclusively license as it does not want other companies to produce OLEDs using the same technology. Both Visionox and JDI are interested in using their technologies in-house, which is a problem for SDC.

In 2022, Japan Display (JDI) announced that it has developed a "historic breakthrough in display technology" - a new OLED deposition process which they refer to as eLEAP, that is said to be cost effective and can be used to create freeform OLEDs that are brighter, more efficient, and longer lasting compared to OLEDs produced using mask evaporation (FMM).

Japan Display announced an agreement with China-based LCD maker HKC Corp to mass produce panels by 2025 in China, based on JDI's technology. But now it is reported that this joint venture is canceled. The report suggests that the two companies could not agree on a license fee that HKC was to pay to JDI. There is speculation that the HKC's canceled IPO and the slowdown in China's economy are to blame.

Japan Display (JDI) plans to start producing medium-sized OLED displays, to be used in tablets and laptops. The company hopes to start producing the first panels (which will be around 14-inch in size) by 2025.

Asus ZenBook 17 Fold OLED (BOE panel)

Up until now, JDI focused on the production of wearable OLED displays, selling its panels for Apple's smartwatches since 2019. The company's production volume was limited, and so was its technology capabilities to increase production panel sizes. It will be interesting to see whether JDI hopes to also supply its future laptop/tablet panels to Apple.

According to reports from Korea, Samsung Display is interested in acquiring OLED IP and patents from Semiconductor Energy Laboratory (SEL). These patents detail an OLED production process that does not require the use of fine metal mask (FMM) evaporation.

The use of FMM to deposit and pattern OLED displays is seen as a major setback towards higher density OLED displays, and it also limits the aperture ratio. It is no wonder that Samsung is interested in such technology, as other display makers have developed similar technologies that offer massive performance boost over the standard FMM process.

China-based Visionox demonstrated many OLED displays and new technologies at Display Week 2023.

So first up, we have some rollable and foldable OLEDs. You can see some impressive looking such flexible OLEDs in the video above, and Visionox featured many such displays at their booth.

Visionox is introducing a new OLED production technology, called Visionox Intelligent Pixelization (or ViP for short) that enables higher-density display production, at over 1,700 PPI.

The idea behind ViP is to replace the fine metal mask (FMM) method with photolithography-based pixel patterning. The process offers several advantages, mainly the increase of aperture ratio to almost 70% (Visionox says the currently reach 69%). FMM methods usually achieve up to 30%, which means that brightness, efficiency and lifetime can all be increased.

In 2022, Japan Display (JDI) announced that it has developed a "historic breakthrough in display technology" - a new OLED deposition process which they refer to as eLEAP, that is said to be cost effective and can be used to create freeform OLEDs that are brighter, more efficient, and longer lasting compared to OLEDs produced using mask evaporation (FMM).

We now hear that China-based LCD maker HKC Corp has signed an agreement with JDI to adopt its technology for mass production of AMOLED displays. Under the agreement HKC will invest billions to build AMOLED factories in China, while JDI will provide the manufacturing expertise and technologies, including eLEAP. The plan is to begin mass production in 2025, with the first applications to be in automotive displays and wearable devices.

A few months ago, Japan Display (JDI) announced that it has developed a "historic breakthrough in display technology" - a new OLED deposition process which they refer to as eLEAP, that is said to be cost effective and can be used to create freeform OLEDs that are brighter, more efficient, and longer lasting compared to OLEDs produced using mask evaporation (FMM).

According to a new report from Korea, Samsung Display is interested in JDI's new technique. Interestingly the report shows conflicting views within SDC - some are interested in adopting this new technology, especially at SDC's upcoming 8-Gen IT OLED production line, while others are more interested in preventing SDC's competitors (JDI, or others?) from using it, perhaps by pressuring OLED equipment makers to not offer needed equipment to JDI.

Japan Display (JDI) announced that it has developed a new OLED deposition technology, which they refer to as eLEAP, that is cost effective and can be used to create OLEDs that are brighter, more efficient, and longer lasting compared to OLEDs produced using mask evaporation (FMM). eLEAP also enables OLED freeform deposition. JDI regards its new technology as a " historic breakthrough in display technology".

eLEAP is based on a lithographic method, and does not require any masks. The main advantage seems to be that OLED displays produced by eLEAP technology can achieve an aperture ratio of 60%, compared with FMM OLEDs which achieve a ratio of about 28%. This means that the OLED displays can be driven at lower currents - which extends the lifetime, improves the efficiency and also enables higher-peak brightness when needed.